Ready-Ship: Get it FAST! Ships Same-Day for 35-410 CFM Models
Promotion! For a limited time: Buy 1 filter get 25% off a replacement element automatically at checkout
| ELEMENT TYPE |
Solid Particulate & Oil Coalescing |
| PERFORMANCE |
ISO CLASS 5 (per ISO 8573.1)
Max Particle Size: 25 micron
Max Oil Content: 10 ppm (mg/m³)
|
| PRESSURE |
35 to 765cfm models: 232psi
885cfm models: 195psi
1300cfm models: 152psi |
| DIFFERENTIAL PRESSURE DRY/WET |
0.7psi |
| DIFFERENTIAL PRESSURE GAUGE |
Optional Add-On |
| TEMPERATURE |
33.8-248° F |
| AUTOMATIC FLOAT DRAIN OUTLET |
1/8" NPT |
| RECOMMENDED ELEMENT LIFE |
12 month (8000HR) |
| WARRANTY |
1-Year
|
Clean dry air is crucial to the performance of any compressed air system along with the downstream components. Line filters remove impurities such as solid particles, dust, dirt, rust, scale, oil, and condensate.
KSI's ECOCLEAN Advanced Premium Filtration (APF) line is manufactured in accordance with DIN EN ISO 9001 quality assurance standards, and is 100% leak tested. ECOCLEAN filters also exceed ISO 8753-1:2010 standards for compressed air purity, carry Canadian Registration Numbers (CRN) for North America, and approval for fluid group 2 in accordance with Pressure Equipment Directive 2014/68/EU, module B+D (category IV).
ECOCLEAN Filters are available in 25 micron, 1 micron, 0.01 micron, as well as Water Separators, Molecular Sieve, and Activated Carbon.
- Connections 1/4" to 3" and flow capacities up to 1300CFM
- Advanced performance particulate and oil filtration with high-density deep-bed pleated elements for increased filtration surface area
- Arc-shaped air inlet for 75% less flow resistance, up to 55% less differential pressure loss, significantly more energy efficient
- Automatic condensate drain, operates via internal float with manual override
- Aluminum die cast housing, cathodic dip coating (e-coating) inside and out, and external powder coat for a lightweight, tough, and corrosion resistant housing
- Special adhesive secures element end caps, prevents blooming and bacterial growth
- Highly efficient polyester drainage layer, protects against inflating effects and cracking, prevents re-entry and favors coalesce and drainage
- Top-mounted Differential Pressure Indicator, optional add-on (not included)
- Simple service, remove filter bowl to replace internal element
- Condensate drain installed in housing adapter allows for quick external removal (70cfm and above models only)
- Serviceable with Line Filter Replacement Elements, and Replacement Float Drain
- Optional Wall Mount & Filter Connect Kit Available
VIEW DIMENSIONAL DRAWING & PRESSURE CORRECTION TABLE HERE
25 micron filters are an excellent choice for systems with variable speed air compressors
A typical water separator works by means of centrifugal force, which requires a minimum speed to properly operate. When a variable speed compressor drops below 30%-40% the air flow may not be fast enough for optimal separation. The 25 micron filter element solves this issue, allowing for separation at all flow rates, while providing virtually the same pressure drop, as well as offering coalescing and particulate filtration and extending the life of downstream filter elements.
A 10psi pressure drop represents a 5% increase in energy cost
Over the 10 year life of a compressed air system, on average the cost of energy to run the system far outweighs the capital investment of buying it. Maintenance costs may not be much, but it is extremely important because it directly impacts energy efficiency and system health. Neglected filters create a constant pressure drop, which destroys the energy efficiency of your system while entrained oil, water, and particulate destroys system components. Protect your equipment, tools, processes, and ultimately your business with proper air treatment and regular maintenance!
For every compressed air system, we highly recommend installing Air Dryer, Water Separator, 1 micron Line Filter, and 0.01 micron Line Filter for the highest quality air.
